Supply chain
Vecow built advanced fanless Quad-Core PoE+ 802.3at embedded system with 2 external removable storages
Press release

Vecow Co., Ltd., a front-runner in the application fields of embedded system, image processing, and intelligent automation, today announces a fanless Power-over-Ethernet embedded controller ECS-7800-PoER supports 3rd Gen Intel Quad-Core series processor, DDR3L and DDR3 maximum dual channel 16GB ram, 4-port IEEE 802.3at PoE+, 2 external removable SSD/HDD trays, 5 display (2 DP, DVI-D, VGA, LVDS), isolated DIO, 2 GbE LANs, CFast, two 2.5" SATA 6Gp/s SSD/HDD trays, 4 COM, 4 USB 3.0 ports, JST connector, and 2 miniPCIe, plus with overvoltage protection and Trusted Platform Module which making ECS-7800-PoER stands out from others in machine vision and GigE imaging, intelligent traffic system, machine vision, surveillance and security, Internet of Things (IOT), AOI, and most of embedded applications.

4 GigE IEEE 802.3at PoE+ & 4 USB 3.0

Using only one Ethernet cable to supply power and transmit and sync data simultaneously, ECS-7800-PoER apply IEEE 802.3at power sourcing equipment enable to supply 50 to 57 VDC, 600 mA, and 25.5W at the powered device, for example, HD LCDs, touchscreens, cameras and motion sensors. Transfer up to 5 Gbps data, USB 3.0 supports 4,608 x 3,288 pixel resolution at 10 frames per second. Design for wider compatibility, higher power supply but less total cost and wiring, ECS-7800-PoER is one-of-a-kind dream fan-less embedded system for machine Vision, outdoor imaging, IOT, Cloud Computing, Big Data, 3-D imaging, ITS (Intelligent Traffic Solutions), quality control, and medical imaging applications.

2 external removable SSD/HDD trays

Enabling speedy data access with RAID 0, 5, and 10 and hard drive failure protection with RAID 1, 5, and 10, ECS-7800-PoER is equipped with two extend SATA III (6 Gbp/s) SSD/HDD trays for better responsiveness and storage capability. With 2 external removable SSD/HDD trays, ECS-7800-PoER enables to remove storage media for security or storage capability. Rapid storage technology combines with RAID and two SATA III practical interfaces enhancing performance and data computing of multi-core platforms.

Fanless, -25 degrees C to +70 degrees C operation temperature

Superior housing and heat dispassion design allow ECS-7800-PoER operation under harsh environments. Dissipating heat from the inner high performance processor through external aluminum heat sink, ECS-7800-PoER enables to operate with performance and stability at temperatures from -25 to 70 degrees Celsius.

Quad-Core CPU & DDR3 integrated performance

ECS-7800-PoER powered by cutting-edge the 3rd Gen Intel Quad-Core i7 Processor (6M Cache, up to 3.3 GHz) not only increasing power efficiency as much as 25% also integrates Intel HD 4000 graphics and extremely low thermal design power as 35W providing an enhanced reliability, safety and shock resistance for fanless operation required environments. Allowing to decode multiple high-resolution full HD videos simultaneous, Intel GMA HD 4000 graphic supports Direct X 11, OpenGL 3.1, Open CL 1.1 and MPEG-2 hardware decoding and up to 3 independent displays. With dual channel SO-DIMM DDR3 1333/1066MHz up to 16GB and quad-core processor, ECS-7800-PoER would be the ideal option of ultimate performance embedded system.

Rich I/O

ECS-7800-PoER provides stable and speedy 2 Ethernet ports with 9.6 kb/s to 1 Gb/s data transmission option for high bandwidth and supports Ethernet Control Automation Technology (EtherCAT). Security improvement with trusted platform module, TPM, ECS-7800-PoER also equipped with 4 COM, 4 USB 3.0, 2 USB2.0, CFast, isolated DIO, 2 mini-PCIe (1 with SIM card socket for WiFi, 3G/GPRS), 3 RS-232 and 1 RS-232/485/422 and 8 in/out GPIO.

More information about Vecow ECS-7800-PoER Fanless PoE Quad-Core Embedded Controller may be found on the company's website at

About Vecow Co., Ltd.

Vecow has been devoted to designing and developing high quality products with innovative technology since it was founded. Our application fields of factory/machine automation, machine vision & GigE imaging, DIO, digital signage, medical and home automation and in-vehicle and environment surveillance are credited to Vecow high-efficient design services.

ECS-7800-PoER provides 2 external removable SSD/HDD trays on front panel for storage capability extension

ECS-7800-PoER provides 2 external removable SSD/HDD trays on front panel for storage capability extension

DIGITIMES' editorial team was not involved in the creation or production of this content. Companies looking to contribute commercial news or press releases are welcome to contact us.

Realtime news
© 2020 DIGITIMES Inc. All rights reserved.
Please do not republish, publicly broadcast or publicly transmit content from this website without written permission from DIGITIMES Inc. Please contact us if you have any questions.