SK Hynix' DRAM supply continues to be short of demand from its PC OEM clients, which have turned to other suppliers to keep safety stock on hand, according to industry sources.
Global DRAM production has been hit due to a fire at SK Hynix' China fab. Combined production capacity at DRAM producers worldwide during the fourth quarter of 2013 is set to be about...
Production capacity at Micron Technology's DRAM fab in Hiroshima, Japan, which was formerly owned by Elpida Memory, will ramp up by 20% through upgrading its 30nm process to 25nm,...
DRAM contract prices are set to edge higher in October, with prices for 4GB DDR3 modules soaring by double digits, according to industry sources. October contract prices for mainstream...
A portion of 30nm DRAM production at Powerchip Technology has been hit by low yield rates, affecting about 7,000-8,000 of the wafers that Kingston Technology has booked, according...
China-based white-box smartphone and tablet manufacturers will have to encounter rising costs of buying DRAM chips if SK Hynix' fire-damaged plant fails to restore full production...
Shortages in the supply of DRAM chips triggered by a fire at the Wuxi plant of SK Hynix are expected to widen in October, according to industry sources, adding that the damaged plant...
Spot DRAM prices have soared over 30% in less than two weeks after a fire broke out at a wafer plant of SK Hynix in Wuxi, China on September 4, jeopardizing wafer production at the...
Micron Technology has seen nearly 30% of its PC-use DRAM production capacity booked up by large clients and its supply available for other clients in September-December 2013 will...
The recent fire at SK Hynix's factory in China has resulted in decreased global supply of PC-use DRAM, which is likely to encourage Samsung Electronics to increase PC-use DRAM output,...
Demand for NAND flash chips has rebounded recently, with contract quotes expected to stay stable through the end of October, according to sources at downstream device manufacturers...
The SK Hynix China plant is expected to resume full operations within 3-6 months, according to sources at equipment makers, who added that the firm has resumed production of only...
